{"id":351,"date":"2026-08-25T03:30:38","date_gmt":"2026-08-25T03:30:38","guid":{"rendered":"https:\/\/www.deltafirst.co.uk\/blog\/power-factor-correction-benefits\/"},"modified":"2026-10-03T16:55:36","modified_gmt":"2026-10-03T16:55:36","slug":"power-factor-correction-benefits","status":"publish","type":"post","link":"https:\/\/www.deltafirst.co.uk\/blog\/power-factor-correction-benefits\/","title":{"rendered":"Power factor correction benefits for commercial buildings"},"content":{"rendered":"<\/p>\n<p>Power factor correction cuts electricity costs, releases spare electrical capacity and reduces strain on transformers and cables, all without changing how a site operates. A vinyl floor manufacturer that installed PFC saved <a href=\"https:\/\/www.eca.co.uk\/CMSPages\/GetFile.aspx?guid=38d1e6c8-ad78-4e99-8745-9fe589d4ef3d\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">169,685 kWh and 253.27 tonnes of CO\u2082 annually<\/a>, and <a href=\"https:\/\/www.beama.org.uk\/static\/uploaded\/080037a7-4dd8-4776-a6a5abb0988269ba.pdf\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">BEAMA guidance<\/a> recommends targeting a site power factor of around 0.95 to avoid excess charges and free up existing capacity.<\/p>\n<p>What this means for your site, in practical terms:<\/p>\n<ul>\n<li>Lower electricity bills through reduced reactive power charges<\/li>\n<li>Fewer or no low power factor penalties on your utility invoice<\/li>\n<li>Deferred spend on transformer or cable upgrades as usable capacity increases<\/li>\n<li>Steadier voltage and less thermal stress on switchgear and motors<\/li>\n<\/ul>\n<h2 id=\"key-takeaways\" tabindex=\"-1\">Key Takeaways<\/h2>\n<p>Power factor correction reduces energy losses, removes reactive power penalties and releases usable electrical capacity without requiring a capital upgrade.<\/p>\n<table>\n<thead>\n<tr>\n<th>Point<\/th>\n<th>Details<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Target 0.95 power factor<\/td>\n<td>Follow BEAMA guidance to reduce excess kVArh charges and free up existing capacity.<\/td>\n<\/tr>\n<tr>\n<td>Savings are tariff-dependent<\/td>\n<td>Reactive power penalties and load profile determine your realistic payback period.<\/td>\n<\/tr>\n<tr>\n<td>Capacity release avoids upgrades<\/td>\n<td>Improving power factor can increase usable transformer kW without new hardware.<\/td>\n<\/tr>\n<tr>\n<td>Match the system to the load<\/td>\n<td>Fixed suits steady loads; automatic suits variable loads with EV chargers or drives.<\/td>\n<\/tr>\n<tr>\n<td>Survey before you invest<\/td>\n<td>Delta First provides site surveys, installation and ongoing maintenance across Essex, Suffolk, Norfolk and Greater London.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2 id=\"table-of-contents\" tabindex=\"-1\">Table of Contents<\/h2>\n<ul>\n<li><a href=\"#what-is-power-factor-correction-and-why-does-it-matter-for-energy-bills\">What is power factor correction and why does it matter for energy bills?<\/a><\/li>\n<li><a href=\"#how-much-can-power-factor-correction-save-you\">How much can power factor correction save you?<\/a><\/li>\n<li><a href=\"#how-pfc-protects-your-electrical-assets-and-frees-up-capacity\">How PFC protects your electrical assets and frees up capacity<\/a><\/li>\n<li><a href=\"#fixed-switched-or-automatic-correction-which-suits-your-site\">Fixed, switched or automatic correction: which suits your site?<\/a><\/li>\n<li><a href=\"#does-your-site-actually-need-power-factor-correction\">Does your site actually need power factor correction?<\/a><\/li>\n<li><a href=\"#specifying-commissioning-and-maintaining-a-pfc-installation\">Specifying, commissioning and maintaining a PFC installation<\/a><\/li>\n<li><a href=\"#where-pfc-fits-into-a-wider-maintenance-strategy\">Where PFC fits into a wider maintenance strategy<\/a><\/li>\n<li><a href=\"#get-a-power-factor-correction-survey-from-deltafirst\">Get a power factor correction survey from Delta First<\/a><\/li>\n<li><a href=\"#sources\">Sources<\/a><\/li>\n<\/ul>\n<h2 id=\"what-is-power-factor-correction-and-why-does-it-matter-for-energy-bills\" tabindex=\"-1\">What is power factor correction and why does it matter for energy bills?<\/h2>\n<p>Power factor measures how efficiently a building converts the electricity it draws (kVA) into usable working power (kW). Motors, fluorescent and older lighting ballasts, and variable speed drives all pull reactive power that does no useful work but still travels through your cables, transformers and meters. A poor power factor, typically anything below 0.9, means your site is drawing more current than it needs to run the same equipment.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/08\/1787402504871_Diagram-showing-power-factor-relationship-with-kVA-kW-and-reactive-power.jpeg\" alt=\"Diagram showing power factor relationship with kVA, kW and reactive power\"><\/p>\n<p>Power factor correction (PFC) installs capacitor banks close to the load to supply that reactive power locally, rather than pulling it from the grid. The site\u2019s apparent power (kVA) drops towards its real power (kW), utilities stop penalising you for the inefficiency, and the cables and transformers feeding your building carry less current for the same output.<\/p>\n<h3 id=\"the-core-benefits-grouped-by-outcome\" tabindex=\"-1\">The core benefits, grouped by outcome<\/h3>\n<ol>\n<li><strong>Energy and carbon<\/strong>: Lower current flow means lower I\u00b2R losses in cables and transformers, which translates directly into reduced kWh consumption and a smaller carbon footprint. This links naturally to wider <a href=\"https:\/\/deltafirst.co.uk\/why\/sustainability-focus.html\" target=\"_blank\" rel=\"noopener\">sustainability commitments<\/a> and reporting obligations.<\/li>\n<li><strong>Financial<\/strong>: Removal or reduction of reactive power and kVA demand charges, which on many commercial tariffs can represent a meaningful slice of the total bill.<\/li>\n<li><strong>Operational<\/strong>: Reduced heat in switchgear and cabling, steadier voltage at the point of use, and less wear on motors and transformers over their working life.<\/li>\n<li><strong>Regulatory and reporting<\/strong>: Efficiency gains support <a href=\"https:\/\/deltafirst.co.uk\/blog\/building-regulations-part-l\" target=\"_blank\" rel=\"noopener\">Part L<\/a> compliance narratives and ESG disclosures where energy intensity is tracked year on year.<\/li>\n<\/ol>\n<blockquote>\n<p><strong>Statistic to note:<\/strong> the <a href=\"https:\/\/www.eca.co.uk\/CMSPages\/GetFile.aspx?guid=38d1e6c8-ad78-4e99-8745-9fe589d4ef3d\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">ECA case study<\/a> recorded annual savings of 169,685 kWh and 253.27 tonnes of CO\u2082 from PFC installation alone, without any change to production processes.<\/p>\n<\/blockquote>\n<h2 id=\"how-much-can-power-factor-correction-save-you\" tabindex=\"-1\">How much can power factor correction save you?<\/h2>\n<p>Most commercial electricity tariffs include a demand charge based on kVA, not just kW, along with reactive energy bands or excess kVArh charges that only appear when your power factor drops below a set threshold. Many facilities managers never spot these charges because they sit buried in the tariff structure rather than appearing as a clean line item.<\/p>\n<p><a href=\"https:\/\/www.eaton.com\/content\/dam\/eaton\/markets\/experience-centers\/white-paper\/Energy-savings-realistic-expectations-for-commercial-facilities.pdf\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">Eaton\u2019s technical guidance<\/a> is blunt about this: utilities routinely pass the cost of low power factor straight to the customer, and adding capacitors reduces the kVAr demand that triggers those penalties. Savings, however, depend entirely on your specific tariff structure and load profile, so a site with a heavily inductive load and a punitive tariff will see a very different result to one with light, steady loads.<\/p>\n<ul>\n<li>Realistic savings ranges vary by tariff and load, but sites paying reactive power penalties often see the fastest return<\/li>\n<li>Payback tends to be quicker where a capacity upgrade would otherwise be needed, since PFC can defer that capital cost entirely<\/li>\n<li>Load variability matters: sites with fluctuating inductive loads need automatic correction to sustain the saving over time<\/li>\n<\/ul>\n<p>The ECA case study is a useful anchor point here: an annual saving of 169,685 kWh, achieved through equipment that typically pays for itself well within a few years on sites where penalties are actively enforced. BEAMA\u2019s guidance notes that payback under two years is common where penalties bite or where an upgrade would otherwise be unavoidable, though every site\u2019s numbers should be verified against its own meter data rather than assumed from a generic benchmark.<\/p>\n<h2 id=\"how-pfc-protects-your-electrical-assets-and-frees-up-capacity\" tabindex=\"-1\">How PFC protects your electrical assets and frees up capacity<\/h2>\n<p><img decoding=\"async\" src=\"https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/08\/1787402492880_Hands-installing-capacitor-module-in-electrical-cabinet.jpeg\" alt=\"Hands installing capacitor module in electrical cabinet\"><\/p>\n<p>Reactive current does not just cost money; it heats up everything it passes through. Reducing it lowers I\u00b2R losses in transformers, feeders and switchgear, which means less thermal ageing on insulation and connections over the transformer\u2019s working life.<\/p>\n<p>The capacity release effect is often the more compelling business case for facilities managers planning growth. Engineering analysis shows that a transformer running at 0.70 power factor delivers considerably less usable real kW before hitting its thermal limit than the same transformer running at 0.95. Improving power factor can unlock that headroom without touching the hardware, which matters when you are adding EV charging points, new plant or an extension and want to avoid a costly supply upgrade.<\/p>\n<ul>\n<li>Lower losses in transformers and cables, extending asset life<\/li>\n<li>Reduced motor heating and slower insulation degradation<\/li>\n<li>More usable kW from existing infrastructure, often avoiding a transformer upgrade entirely<\/li>\n<\/ul>\n<p><strong>Pro Tip:<\/strong> <em>If your site has variable speed drives, LED retrofits or other nonlinear loads, ask your contractor to check total harmonic distortion (THD) alongside power factor. Standard capacitors can resonate with harmonic-rich loads, so a detuned or filtered solution may be the safer specification.<\/em><\/p>\n<h2 id=\"fixed-switched-or-automatic-correction-which-suits-your-site\" tabindex=\"-1\">Fixed, switched or automatic correction: which suits your site?<\/h2>\n<p>Not every site needs the same type of correction, and getting this wrong either wastes money or fails to hold the power factor where it needs to be.<\/p>\n<ul>\n<li><strong>Fixed capacitors<\/strong> suit sites with a steady, predictable load, such as a single large motor running continuously; they are the simplest and cheapest option but offer no flexibility if the load changes.<\/li>\n<li><strong>Switched or staged capacitor banks<\/strong> step capacitance in and out as demand shifts, giving a reasonable balance of cost and control for sites with moderate load variation.<\/li>\n<li><strong>Automatic PFC<\/strong>, controlled by a power factor relay, continuously adjusts capacitance to match the load in real time. Guidance from YesSS recommends this approach specifically for sites with variable inductive loads, since it maintains the optimal power factor as demand changes and avoids the overcorrection that fixed banks risk during low-load periods.<\/li>\n<li><strong>Detuned or filtered systems<\/strong> are necessary wherever harmonic-producing loads are significant, since standard capacitors can amplify rather than absorb harmonic distortion on those sites.<\/li>\n<\/ul>\n<p>Sites adding variable demand, such as EV chargers or new production lines with drives, benefit from automatic systems that adapt without manual intervention as loads shift throughout the day.<\/p>\n<h2 id=\"does-your-site-actually-need-power-factor-correction\" tabindex=\"-1\">Does your site actually need power factor correction?<\/h2>\n<p>Certain warning signs point towards a power quality issue worth investigating before it shows up as an unexplained cost on next quarter\u2019s invoice.<\/p>\n<ol>\n<li>Your utility bill shows a reactive power, kVA demand or low power factor charge you cannot fully explain.<\/li>\n<li>Cables, switchgear or transformers run noticeably warm even when load appears moderate.<\/li>\n<li>Motors seem to underperform or trip more often than expected for their rated output.<\/li>\n<li>A persistent power factor below 0.9 on your meter reports, or unexplained gaps between kW and kVA readings, both justify a closer look.<\/li>\n<\/ol>\n<p>The measurement itself should cover half hourly kW and kVArh readings over at least a week to capture your genuine load profile, alongside a THD screening if you run variable speed drives, LED lighting at scale or other nonlinear loads. Displacement power factor can look healthy while true power factor is poor on sites with significant harmonic content, so a harmonics scan alongside the PF survey is worth insisting on. Aim for a target of around 0.95, and treat anything persistently below 0.9 as a trigger for a full power quality survey with an accredited contractor.<\/p>\n<h2 id=\"specifying-commissioning-and-maintaining-a-pfc-installation\" tabindex=\"-1\">Specifying, commissioning and maintaining a PFC installation<\/h2>\n<p>Getting the specification right up front avoids most of the problems that undermine a PFC installation later. The capacitor bank needs correctly sized kVAr steps matched to your actual load profile, a controller suited to how variable that load is, and proper protection and labelling throughout.<\/p>\n<ul>\n<li>Verify kVAr sizing against real half hourly data, not an assumed nameplate rating<\/li>\n<li>Confirm the controller\u2019s switching logic and step sizes suit your load variability<\/li>\n<li>Insist on commissioning documentation, including measured power factor before and after<\/li>\n<li>Schedule periodic health checks on capacitor condition, insulation and switching contactors, since capacitors have a finite service life and degrade gradually rather than failing outright<\/li>\n<\/ul>\n<p>The most common mistakes are overcorrection (pushing power factor above unity, which can itself attract penalties on some tariffs), poor placement that fails to relieve the actual bottleneck, and installing standard capacitors on a harmonic-rich site without detuning. Eaton\u2019s white paper is worth reading in full here, as it cautions against inflated savings claims from generic \u201cblack box\u201d solutions sold without a proper site survey.<\/p>\n<p><strong>Pro Tip:<\/strong> <em>Ask any contractor quoting for PFC to show their measured before-and-after power factor data from your own meters, not a generic percentage saving. A proper survey is the difference between a sound investment and an expensive guess.<\/em><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/08\/1787402506046_Close-up-of-power-meter-showing-reactive-and-real-power-readings.jpeg\" alt=\"Close-up of power meter showing reactive and real power readings\"><\/p>\n<h2 id=\"where-pfc-fits-into-a-wider-maintenance-strategy\" tabindex=\"-1\">Where PFC fits into a wider maintenance strategy<\/h2>\n<p>We see power factor correction as a natural extension of planned preventative maintenance, not a standalone project. Once installed, automatic PFC data feeds into the same <a href=\"https:\/\/deltafirst.co.uk\/blog\/predictive-maintenance\" target=\"_blank\" rel=\"noopener\">predictive maintenance<\/a> approach we already apply to switchgear and distribution boards, flagging capacitor degradation before it causes a failure.<\/p>\n<p>Any survey or installation should involve an accredited electrical contractor who understands your site\u2019s load profile, not a one-size-fits-all product sale.<\/p>\n<blockquote>\n<p><em>\u2014 Ashley<\/em><\/p>\n<\/blockquote>\n<h2 id=\"get-a-power-factor-correction-survey-from-deltafirst\" tabindex=\"-1\">Get a power factor correction survey from Delta First<\/h2>\n<p>Delta First gives you one accountable partner for the whole process, from initial site survey through installation to ongoing maintenance, rather than juggling separate suppliers for each stage. Our qualified engineers assess your half hourly consumption data, identify where reactive charges or capacity constraints are costing you money, and specify a correction system sized to your actual load, not a generic estimate.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/07\/1783116648075_deltafirst.jpg\" alt=\"Delta First\"><\/p>\n<p>Clients receive a single point of contact throughout, full commissioning documentation showing measured before-and-after power factor, and the option to fold ongoing capacitor health checks into an existing planned maintenance contract or take PFC as a standalone installation. We work across Essex, Suffolk, Norfolk and Greater London, serving commercial, industrial, healthcare, education and retail sites alike. If your site fits the profile of heavier inductive load, our <a href=\"https:\/\/deltafirst.co.uk\/industrial-electricians-essex\/index.html\" target=\"_blank\" rel=\"noopener\">industrial electricians in Essex<\/a> team can also advise on wider electrical capacity planning alongside PFC. Request a <a href=\"https:\/\/deltafirst.co.uk\/commercial-electrical-contractors-essex\/index.html\" target=\"_blank\" rel=\"noopener\">commercial electrical contractor quotation<\/a> today, or book a planned maintenance survey to see exactly what your site\u2019s power factor is costing you.<\/p>\n<h2 id=\"sources\" tabindex=\"-1\">Sources<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.eca.co.uk\/CMSPages\/GetFile.aspx?guid=38d1e6c8-ad78-4e99-8745-9fe589d4ef3d\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">ECA: Power factor correction case study (ECA document)<\/a><\/li>\n<li><a href=\"https:\/\/www.beama.org.uk\/static\/uploaded\/080037a7-4dd8-4776-a6a5abb0988269ba.pdf\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">BEAMA guide to power factor correction<\/a><\/li>\n<li><a href=\"https:\/\/www.eaton.com\/content\/dam\/eaton\/markets\/experience-centers\/white-paper\/Energy-savings-realistic-expectations-for-commercial-facilities.pdf\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">Eaton: Energy savings \u2014 realistic expectations for commercial facilities (white paper)<\/a><\/li>\n<li>YesSS blog: Power factor correction \u2014 what it is and why your site might need it<\/li>\n<\/ul>\n<h2 id=\"recommended\" tabindex=\"-1\">Recommended<\/h2>\n<ul>\n<li><a href=\"https:\/\/deltafirst.co.uk\/blog\/predictive-maintenance\" target=\"_blank\" rel=\"noopener\">Predictive maintenance for UK commercial buildings: 2026 guide<\/a><\/li>\n<li><a href=\"https:\/\/deltafirst.co.uk\/why\/sustainability-focus.html\" target=\"_blank\" rel=\"noopener\">Sustainability Focus | Delta First Building Services | Delta First Building Services<\/a><\/li>\n<li><a href=\"https:\/\/deltafirst.co.uk\/sectors\/commercial-offices.html\" target=\"_blank\" rel=\"noopener\">Building Services for Commercial Offices | Delta First Building Services<\/a><\/li>\n<li><a href=\"https:\/\/deltafirst.co.uk\/blog\/what-are-smart-buildings-a-uk-guide-for-facilities-managers\" target=\"_blank\" rel=\"noopener\">What are smart buildings? A UK guide for facilities managers<\/a><\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p>Discover how power factor correction can lower electricity costs, reduce equipment strain, and enhance your building\u2019s energy efficiency.<\/p>\n","protected":false},"author":2,"featured_media":352,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_uag_custom_page_level_css":"","footnotes":""},"categories":[11,3,13,9],"tags":[720,719,55,473,121,339,134,729,726,723,716,310,182,722,727,730,731,56,728,251,232,37,117,710,712,713,715,714,717,718,721,724,725,61],"class_list":["post-351","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-case-studies","category-electrical","category-facilities-management","category-planned-preventative-maintenance","tag-apfc","tag-automatic-power-factor-correction","tag-building-services","tag-carbon-reduction","tag-commercial-building-maintenance","tag-commercial-buildings","tag-commercial-electrical-maintenance","tag-commercial-electrical-systems","tag-commercial-electricity-costs","tag-commercial-energy-efficiency","tag-commercial-power-factor-correction","tag-delta-first-building-services","tag-electrical-compliance","tag-electrical-efficiency","tag-electrical-energy-savings","tag-electrical-engineering","tag-electrical-infrastructure","tag-electrical-maintenance","tag-electrical-systems","tag-energy-efficiency","tag-energy-management","tag-facilities-management","tag-facilities-managers","tag-me-maintenance","tag-power-factor-correction","tag-power-factor-correction-benefits","tag-power-factor-correction-for-commercial-buildings","tag-power-factor-correction-uk","tag-power-factor-improvement","tag-power-factor-optimisation","tag-reactive-power","tag-reduce-electricity-costs","tag-reduce-energy-costs","tag-uk-facilities-management"],"blocksy_meta":[],"uagb_featured_image_src":{"full":["https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/08\/1787402500554_Technician-hands-adjusting-power-factor-correction-panel.jpeg",1080,720,false],"thumbnail":["https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/08\/1787402500554_Technician-hands-adjusting-power-factor-correction-panel-150x150.jpeg",150,150,true],"medium":["https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/08\/1787402500554_Technician-hands-adjusting-power-factor-correction-panel-300x200.jpeg",300,200,true],"medium_large":["https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/08\/1787402500554_Technician-hands-adjusting-power-factor-correction-panel-768x512.jpeg",768,512,true],"large":["https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/08\/1787402500554_Technician-hands-adjusting-power-factor-correction-panel-1024x683.jpeg",1024,683,true],"1536x1536":["https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/08\/1787402500554_Technician-hands-adjusting-power-factor-correction-panel.jpeg",1080,720,false],"2048x2048":["https:\/\/www.deltafirst.co.uk\/blog\/wp-content\/uploads\/2026\/08\/1787402500554_Technician-hands-adjusting-power-factor-correction-panel.jpeg",1080,720,false]},"uagb_author_info":{"display_name":"Delta First Editorial Team","author_link":"https:\/\/www.deltafirst.co.uk\/blog\/author\/deltaeditor\/"},"uagb_comment_info":1,"uagb_excerpt":"Discover how power factor correction can lower electricity costs, reduce equipment strain, and enhance your building\u2019s energy efficiency.","_links":{"self":[{"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/posts\/351","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=351"}],"version-history":[{"count":6,"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/posts\/351\/revisions"}],"predecessor-version":[{"id":704,"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/posts\/351\/revisions\/704"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/media\/352"}],"wp:attachment":[{"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=351"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=351"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.deltafirst.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=351"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}